Tested with: KSA Version 2026.10.19.5638
The 2026.10 builds added four part elements for high-energy propulsion: two new engine cores, a nozzle without walls, and a scoop that gathers interstellar hydrogen. Stock uses them in the FPD-1 Torch, the RAIR-1 Antimatter Ramjet (Content\Core\CorePropulsionAGameData.xml) and the MRS-1 Magnetic Scoop (Content\Core\CoreElectricalAGameData.xml), all under the Interstellar editor tag.
This area is still moving. The developers removed and reworked parts of it more than once in 2026.10, and have said interstellar travel will change again. Expect these elements to change.
This page assumes you know how a normal engine is put together: a <Rocket> that names a core and a nozzle, wired up with <FeedsFrom> and <ConsumerFeedWiring>. See Parts for that. These elements go in the GameData block like any other engine element.
A core that heats propellant to a fixed temperature instead of burning it, such as a fusion or nuclear thermal engine. The FPD-1 Torch:
<SubPartGameData Id="CorePropulsionA_Subpart_FusionTorchAssembly">
<Rocket Id="Engine">
<Core Id="FusionCore" />
<Nozzle Id="Nozzle" />
</Rocket>
<ThermalCore Id="FusionCore">
<FeedsFrom Parent="true" />
<Reaction Id="FusionH2" />
<CoreTemperature K="3000000" />
<MaxPressure Bar="1000" />
<ThermalEfficiency Value="0.95" />
<MinimumThrottle Value="0.01" />
</ThermalCore>
<DeLavalNozzle Id="Nozzle">
<!-- an ordinary bell nozzle -->
</DeLavalNozzle>
</SubPartGameData>
| Element | Default | What it does |
|---|---|---|
<Reaction Id> |
required | Must name a <ThermalReaction>. Anything else throws on load. |
<CoreTemperature> |
required | Temperature the propellant is heated to. Takes any temperature unit. |
<MaxPressure> |
50 bar | Chamber pressure at full throttle. |
<ThermalEfficiency Value> |
1 | Fraction of the heat that ends up in the exhaust. |
<MinimumThrottle Value> |
1 | Lowest throttle, clamped to 0.01 to 1. The default of 1 means it cannot throttle at all, so set this. |
<MinimumPulseTime> |
1 ms | Shortest firing for attitude control pulses. |
<Plumbing> |
Connector capability, as on <Combustor>. |
Stock thermal reactions, in Content\Core\Reactions.xml: ThermalH2, ThermalH2O, ThermalCH4, ThermalNH3, ThermalCO2, ThermalN2 (propellant heated as-is) and FusionH2 (hydrogen plasma). Each is a large generated table of exhaust properties against temperature and pressure. Reuse a stock one rather than writing your own.
Antimatter annihilating with hydrogen, heating reaction mass that is either carried in tanks or scooped from space. The RAIR-1:
<SubPartGameData Id="CorePropulsionA_Subpart_AntimatterRamAssembly">
<Rocket Id="Engine">
<Core Id="RamCore" />
<Nozzle Id="Nozzle" />
</Rocket>
<AntimatterRamCore Id="RamCore">
<FeedsFrom Parent="true" />
<JetPower TW="30" />
<AnnihilationEfficiency Value="0.5" />
<CarriedExhaustFractionOfLight Value="0.4" />
<Antimatter Id="AntiH2(l)" />
<ReactionMass Id="H2(l)" />
<MinimumThrottle Value="0.01" />
</AntimatterRamCore>
<MagneticNozzle Id="Nozzle">
<FxExitDiameter M="4.605" />
<ExhaustLocation X="-1.23" Y="0.0" Z="0.0" />
<ExhaustDirection X="-1" Y="0" Z="0" />
<SoundEvent Action="On" SoundId="DefaultEngineSoundBehavior" />
</MagneticNozzle>
</SubPartGameData>
| Element | Default | What it does |
|---|---|---|
<JetPower> |
30 TW | Power in the exhaust at full throttle. Takes any power unit. |
<AnnihilationEfficiency Value> |
0.5 | Fraction of the annihilation energy that becomes jet power. Sets how much antimatter is used. |
<CarriedExhaustFractionOfLight Value> |
0.4 | Exhaust speed of carried reaction mass, as a fraction of light speed. |
<Antimatter Id> |
AntiH2(l) |
Antimatter substance. |
<ReactionMass Id> |
H2(l) |
Reaction mass substance. |
<MinimumThrottle Value> |
0.01 | Lowest throttle. |
<MinimumPulseTime> |
1 ms | Shortest firing. |
Thrust at full throttle is 2 × JetPower / exhaust speed. At the defaults that is about 500 kN. If a scoop is collecting hydrogen, the scooped mass is used first and only the shortfall comes from the tanks, so a fast ramjet in interstellar space can run on antimatter alone.
The core always uses bulk fluid plumbing, so give the part a connector with BulkFluid capability.
A nozzle made of magnetic field rather than metal. It has no bell, so it takes no ExitDiameter, AreaRatio or efficiencies. It takes the usual ExhaustLocation, ExhaustDirection, SoundEvent and plume elements, plus:
| Element | Default | What it does |
|---|---|---|
<FxExitDiameter> |
1 m | Width of the exhaust effect only. Has no effect on performance. |
Collects interstellar gas while moving. The MRS-1:
<PartGameData Id="CoreElectricalA_Prefab_MagneticScoopA" DisplayName="MRS-1 Magnetic Scoop">
<SolidCylinderMass><Mass Kg="5000"/><Length M="0.32"/><Radius M="1"/></SolidCylinderMass>
<EditorTag Value="Interstellar" />
<MagneticScoop Id="Scoop">
<CaptureRadius Km="1000" />
<Collects Id="H2(l)" />
</MagneticScoop>
</PartGameData>
| Element | Default | What it does |
|---|---|---|
<CaptureRadius> |
1000 km | Radius of the collecting field. |
<Collects Id> |
H2(l) |
Substance the gas becomes in your tanks. |
Mass collected per second is gas density × π × CaptureRadius² × speed, where the speed is relative to the current star. Gas density comes from the system's <InterstellarGas AtomsPerCm3> (default 0.1, see <System> Tag). At 0.1 atoms/cm³ that is about 1.7 × 10⁻²² kg/m³, so scooping only adds up at a large fraction of light speed.
The scoop only works while the vessel is orbiting a star or a barycenter. Inside a planet's sphere of influence it collects nothing. While an <AntimatterRamCore> on the vessel is firing, the scooped gas goes straight into the engine. Otherwise it is delivered to tanks that can hold the Collects substance, in 1 kg lots.
MinimumThrottle out of a <ThermalCore>. It cannot throttle below 100%.<ThermalCore> at a combustion reaction such as Hydrolox. It must be a <ThermalReaction>.