Tested with: KSA Version 2026.10.19.5638
Parachutes were added in 2026.9.4.5400. A parachute is a <Parachute> element in a part's (or subpart's) GameData block, the same place engines and batteries go (see Parts). The canopy itself is cloth-simulated and drawn by the game, so you do not model it. Your part only needs the packed shape.
Stock examples are in Content\Core\CoreUtilityAGameData.xml: two radial drogues, two radial mains, and a parachute bay holding a drogue cluster and a main cluster.
<PartGameData Id="MyMod_RadialChute" DisplayName="My Radial Chute">
<EditorTag Value="Radial" />
<EditorTag Value="Landing" />
<Connector Id="_connector1">
<Flags>ToSurface</Flags>
</Connector>
<Parachute Id="MainChute" DiameterM="30" MinDiameterM="20" MaxDiameterM="50" ReefRatio="0.4"
BurstPressurePa="15000" LineRatingN="400000" CutInSequence="false">
<Attach X="0" Y="0" Z="-0.193" />
<PbrMaterialRef Id="ParachuteCanopy_Material_CheckerLongRed" />
<PbrMaterialRef Id="ParachuteCanopy_Material_White" />
</Parachute>
</PartGameData>
That is stock's "Parachute Radial A". <Attach> is where the risers meet the part, in the part's assembly coordinates. Each <PbrMaterialRef> is a canopy pattern the player can pick, and the first one is the default.
Stock ships ParachuteCanopy_Material_White, _CheckerLongRed, _CheckerLongOrange, _CheckerExtraLongOrange, _StripesRed and _Tricolor.
You do not write <ParachuteDeploy> or <ParachuteCut>. The game adds one of each to any part with a <Parachute>, and those are what appear in the staging sequence (PA for a main, DR for a drogue, CT for a cut).
All optional. Defaults are the game's own.
| Attribute | Default | What it does |
|---|---|---|
DiameterM |
30 | Canopy diameter. Clamped to the min/max below. Sets drag, fill time and canopy mass (0.115 kg per m² of canopy). |
MinDiameterM / MaxDiameterM |
1 / 50 | Range the player can tune the diameter across in the editor. |
ReefRatio |
0.4 | Diameter fraction while reefed. Reefed drag is this ratio squared, so 0.4 gives 16% of full drag. |
ReefDurationS |
10 | Seconds the canopy stays reefed before it opens fully. |
BurstPressurePa |
15000 | Dynamic pressure on the canopy above which it rips. |
LineRatingN |
400000 | Line tension above which the lines snap. |
RiserLengthM |
10 | Riser length, clamped to 1 to 100 m. |
DeployAltitudeM |
0 | Armed chutes wait until below this altitude. 0 means deploy as soon as it is safe. |
Drogue |
false | Marks it as a drogue. Shows as DR in staging, and mains with CutsDrogues cut it. |
CutsDrogues |
false | When this chute deploys, every drogue on the same part is cut away. |
CutInSequence |
true | Whether the cut action starts in the staging sequence. The player can still toggle it in the editor. |
CanopyCount |
1 | Canopies fitted by default, for a cluster. |
MaxCanopyCount |
1 | Most canopies the player can fit. |
CanopyRadiusM |
0 | Radius of the ring the cluster's canopies are spread around <Attach>. |
The player can change diameter, reefing, riser length, deploy altitude and a g-limit in the editor, starting from your values. Those choices are saved per craft.
One <Parachute> with MaxCanopyCount above 1 becomes a cluster: the game creates that many canopies, fits CanopyCount of them, and lets the player change the count. Stock's parachute bay main chutes:
<Parachute Id="MainChute" DeployAltitudeM="800" DiameterM="25" MinDiameterM="20" MaxDiameterM="40"
ReefRatio="0.4" BurstPressurePa="15000" LineRatingN="200000"
CanopyCount="3" MaxCanopyCount="4" CanopyRadiusM="0.243" CutInSequence="false" CutsDrogues="true">
<Attach X="0.221" Y="0" Z="0" />
...
</Parachute>
KeyframeAnimationModule, its animation plays forward to open bay doors.LineRatingN, dynamic pressure is under BurstPressurePa, the deceleration is under the g-limit, and the craft is below DeployAltitudeM if one is set.ReefDurationS.At any point, too much pressure rips the canopy and too much tension snaps the lines. Either way the canopy is gone. A cut drops it on purpose.
<Parachute> in the <Part> (assets) block instead of the GameData block.<ParachuteDeploy> or <ParachuteCut> yourself. They are created automatically.DiameterM outside MinDiameterM..MaxDiameterM. It is clamped silently.CutsDrogues="true" on a different part from its drogues. It only cuts drogues on its own part.LineRatingN too low for the craft. The chute then never finds a safe moment to deploy and stays armed.